Konica Minolta bizhub 4000P Service Manual

bizhub 4700P/bizhub 4000P Service Manual
- 169 -
5.9 Updating the printer firmware
5.9.1 Confirming the firmware version
After turning on the power, confirm the version of the firmware on the Splash screen displayed on the
liquid crystal panel.
5.9.2 Procedures for updating the firmware via USB flash/thumb
drive
The following procedure explains the firmware update by using USB flash/thumb drive. This procedure
is applied for bizhub 4700P only.
Note: USB drive must be formatted for the FAT32 and not NTFS.
1. Store the firmware file (xxxx.fls) which are compatible with the product to the USB flash/thumb drive.
2. Insert the USB flash/thumb drive into the front panel USB port.
Controller FW version
Engine FW version

Konica Minolta bizhub 4000P Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 100, 000 pages
Standard Output Capacity	150 sheets
Memory	256 MB
Supported Operating Systems	Windows, Mac OS, Linux
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet
PDL	PCL 6, PostScript 3, XPS
Processor Speed	1.2 GHz