Konica Minolta bizhub 4000P Service Manual

bizhub 4700P/bizhub 4000P Service Manual
- 263 -
10. Printer specifications
10.1 Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode
Description
Power consumption
(Watts)
Printing
The product is generating hard-copy output from electronic inputs.
600 W (bizhub 4000P)
640 W (bizhub 4700P)
Ready
The product is waiting for a print job.
10 W
Sleep
Mode
The product is in a high-level energy-saving mode.
5 W
Hibernate
The product is in a low-level energy-saving mode.
0.5 W
Off
The product is plugged into an electrical outlet, but the power switch is
turned off.
0
The power consumption levels listed in the previous table represent time-averaged measurements.
Instantaneous power draws may be substantially higher than the average.
Values are subject to change.
10.2 Electrical specifications
Low-voltage models
 100 to 127 V ac at 47 to 63 Hz nominal
 90 to 137 V ac, steady state operational extremes
High-voltage models
 220 to 240 V ac at 47 to 63 Hz nominal (not available in all countries)
 198 to 254 V ac, steady state operational extremes

Konica Minolta bizhub 4000P Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 100, 000 pages
Standard Output Capacity	150 sheets
Memory	256 MB
Supported Operating Systems	Windows, Mac OS, Linux
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet
PDL	PCL 6, PostScript 3, XPS
Processor Speed	1.2 GHz