Konica Minolta bizhub 4000P Service Manual

bizhub 4700P/bizhub 4000P Service Manual
- 54 -
Action
Yes
No
Step 2
POR into the Diagnostics menu and perform a sensor
test:
Diagnostics Menu >Base Sensor
Test >Narrow Media
Does the sensor state on the control panel display
change when it is toggled?
Go to step 3.
Replace the Narrow
media/bin full sensor. See
Narrow media/bin full
sensor removal.
Step 3
Check the redrive rollers for damage.
Are they free of damage?
Go to step 4.
Replace the redrive
assembly. See Redrive
assembly removal.
Step 4
Does the error remain?
Contact the next level of
support.
The problem is solved.
4.3.5 202 paper jams
[x]-page jam, open rear door. [20y.xx]
1. Press the button on the right side of the printer, and then open the front door.
2. Gently pull down the rear door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of
injury from a hot component, allow the surface to cool before touching it.

Konica Minolta bizhub 4000P Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 100, 000 pages
Standard Output Capacity	150 sheets
Memory	256 MB
Supported Operating Systems	Windows, Mac OS, Linux
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet
PDL	PCL 6, PostScript 3, XPS
Processor Speed	1.2 GHz