Making Basic Copies
5-3
5 To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
Copying begins.
" If the Stop/Reset key is pressed while copying, JOB CANCEL
appears. To stop copying, select
YES. To continue copying, select
NO.
Specifying the Copy Quality Setting
Select the document type and copy density appropriate for the contents and
density of the document to be copied.
Selecting the Document Type
1 In the main screen (Copy mode), press the + or , key to select the cur-
rent copy quality setting, and then press the Select key.
2 Press the + or , key to select MODE, and then press the Select key.
3 Press the + or , key to select MIX, TEXT, PHOTO, FINE/MIX, FINE/
TEXT
or FINE/PHOTO, and then press the Select key.
The main screen (Copy mode) appears again.
Specifying the Copy Density
1 In the main screen (Copy mode), press the + or , key to select the cur-
rent copy quality setting, and then press the Select key.
2 Press the + or , key to select DENSITY, and then press the Select key.
3 Press the * or ) key to select the desired copy density, and then press
the Select key.
As the indicator is moved to right, the density becomes darker.
The main screen (Copy mode) appears again.
" If TEXT or FINE/TEXT is selected as the copy mode, select
either AUTO or MANUAL in step 3. If MANUAL is selected, specify
the copy density.
To Next Page