Konica Minolta Magicolor 1680MF - Specifying the Zoom Ratio

Making Basic Copies 5-4
Specifying the Zoom Ratio
The zoom ratio can be specified either by selecting a preset zoom ratio or by
specifying a custom zoom ratio.
Selecting a Preset Zoom Ratio
1 In the main screen (Copy mode), press the + or , key to select the cur-
rent zoom ratio setting, and then press the Select key.
2 Press the + or , key to select FIXED, and then press the Select key.
3 Press the + or , key to select the desired zoom ratio, and then press the
Select key.
The main screen (Copy mode) appears again.
" The following zoom ratios can be selected.
In metric dimensions:
50%, 70% (A4 → A5), 81% (A4 → B5), 100%, 115% (B5 → A4), 141%
(A5
→ A4), 200%
In inch dimensions:
50%, 64% (LT → ST), 78% (LG → LT), 100%, 129% (ST → LT), 154%
(ST
→ LG), 200%
The zoom ratio cannot be changed using the keypad.
Specifying a Custom Zoom Ratio
1 In the main screen (Copy mode), press the + or , key to select the cur-
rent zoom ratio setting, and then press the Select key.
2 Press the + or , key to select MANUAL, and then press the Select key.
3 Use the keypad to type in the desired zoom ratio, or press the + or , key
to specify the zoom ratio, and then press the Select key.
The main screen (Copy mode) appears again.
" Each press of the + or , key changes the zoom ratio by 1%.
A setting between 50% and 200% can be specified.