Saving data Writing to internal memory
207
Text edit dialog
Where can names be changed?
Names can be changed on the following pages.
Setting the date and time
NAUTILUS has an internal calendar, which is used to record
the date and time when you save data. You can set the date
and time by using the MEDIA– Utility page’s Set
Date/Time menu command.
You will need make these settings after you purchase the
NAUTILUS, and after replacing the calendar backup battery.
1. Press the MODE button to select MEDIA mode.
2. Select the MEDIA– Utility page.
3. Open the page menu, and select the Set Date/Time
command.
The following dialog box will appear.
4. Use the VALUE controllers to set the correct year,
month, day, hour, minute, and second.
5. Press the OK button.
If the calendar backup battery runs low, the following
message will appear in the LCD screen:
“The clock battery voltage is low. Please replace the
battery, and set the date and time in Media mode”.
If the calendar backup battery runs down completely, the
calendar will be initialized, and the date and time will not
be recorded correctly. Your Korg Distributor can help
you find a service center to replace the battery.
Cursor
Character Set
Selects the type of
character.
Character buttons
Shift button
Switches between uppercase and
lowercase characters.
Delete button
Deletes the character to
the left of the cursor.
Cursor buttons
Move the cursor to
left or right.
Space button
Insert a space at the
cursor location.
Text
Cancel button, OK button
If you are satised with the text that you input,
press the OK button. If you wish to discard your
input and exit the text edit box, press the
Cancel button.
Set Lists
SET LIST > page menu command:
Write Set List
Set List Slots SET LIST > Slot Name parameter
Programs
PROGRAM > page menu command:
Write Program
Combinations
COMBINATION > page menu command:
Write Combination
Wave Sequences
GLOBAL > Wave Sequence– page menu
command: Write Wave Sequence
Drum Kits
GLOBAL > Drum Kit– page menu command:
Write Drum Kit
Arpeggio Pattern
GLOBAL > Arpeggio Pattern– page menu
command: Rename Arpeggio Pattern
Effect Presets
PROGRAM, COMBINATION, SEQUENCER, and
SAMPLING > IFX, MFX/TFX– page menu
command: Write FX Preset
Songs
SEQUENCER > page menu command:
Rename Song
Regions Track Edit– Edit Region
Tracks SEQUENCER > Track Name
Patterns SEQUENCER > Pattern Name
SAMPLING mode
Multisamples
SAMPLING > page menu command:
Rename MS
SAMPLING mode
Samples
SAMPLING > page menu command:
Rename Sample
Categories &
sub categories
GLOBAL > Program, Combination, and
Category tabs
Files MEDIA > page menu command: Rename
Directories
MEDIA: Utility page menu commands:
Create Directory & Rename
Drive volumes MEDIA: Utility page menu command: Format
To Next Page
Loading...
Need help?
General
