Korg X5DR AI2 SYNTHESIS MODULE User Manual

Reference Guide
97
Reference Guide
Program
Parameters
1
14C Keyboard Sync: Determines how subsequent notes are affected by modulation. For a setting of
OFF, modulation is applied to subsequent notes in the same way it is currently being applied to
notes that are already held down. That is, subsequent notes (or Note On message) will not be
affected by the Delay parameter. For a setting of ON, modulation restarts for each new note.
15A–15D After Touch & Joystick Control
These parameters determine how a Program responds to After Touch, VDF Modulation MIDI
Controller2 and Pitch Bender.
15A After Touch Pitch Bend: This parameter determines the After Touch pitch bend range (within ±1
octave).
After Touch VDF Cutoff Frequency: This parameter determines how the VDF Cutoff Frequency
responds to After Touch. For positive values, After Touch increases the Cutoff Frequency, thus
making the sound brighter. Negative values have the opposite effect. For this parameter to have
any affect, you must set the VDF Cutoff Frequency to something other than 99.
15B After Touch VDF MG Intensity: This parameter determines how VDF modulation responds to
After Touch. When After Touch is applied, the VDF Cutoff Frequency is modulated. (see
“14A–14C VDF Modulation” on page 96.)
After Touch VDA Amplitude: This parameter determines how the VDA responds to After Touch.
In other words, how After Touch affects the volume of Oscillator1. For positive values, increasing
After Touch (pressing down on a held key) increases the volume. Negative settings have the
opposite effect.
LCD Parameter Range Description
15A
After Touch Pitch Bend
(P.Bend)
–12…+12 After touch pitch bend range
After Touch VDF Cutoff
Frequency (Fc)
–99…+99 VDF Cutoff Frequency sensitivity to After Touch
15B
After Touch VDF MG
Intensity (VDF.MG)
0–99 VDF modulation sensitivity to After Touch
After Touch VDA
Amplitude (Amp)
–99…+99 VDA1 sensitivity to After Touch
15C
Joystick VDF MG
Intensity (VDF.MG)
0–99
VDF modulation sensitivity to the VDF Modulation MIDI
Controller2
15D
Joystick Pitch Bend
Range (P.Bend)
–12…+12 Pitch bend range and direction
Joystick VDF Sweep
Intensity (VDF)
–99…+99
VDF modulation sensitivity to the VDF Modulation MIDI
Controller Pitch Bendor
15A AFT CTRL ø
P.Bend+12 Fc+00
15A
15B 15C
15D BEND CTRL
P.Bend+00 VDF+00
15D
15B AFT CTRL ø
VDF.MG00 Amp+00
15C J.STK Down ø
VDF.MG=99
ø

Korg X5DR AI2 SYNTHESIS MODULE Specifications

General

Brand	Korg
Model	X5DR AI2 SYNTHESIS MODULE
Category	Synthesizer
Language	English