Controls
iv
6 [+1]/[
▲
] button, [–1]/[
▼
] button
In Program Play mode and Combination Play mode, pressing the [+1] and [–1] buttons increment
and decrement the Program and Combination numbers in steps of 1.
In Program Edit mode, Combination Edit mode, Multi mode, and Global mode, these buttons can
be used to increase and decrease the currently-selected parameter value. In these modes, pressing
one of these buttons while pressing and holding down the [
▲
] or [
▼
] button will change the
parameter value very quickly.
These buttons are also used when the X5DR requires a yes or no answer from you on the LCD
screen. When the message “-- OK?” appears, press the [
▲
] button to continue, or the [
▼
] button
to cancel.
7 [GLOBAL]/[MULTI] button
Press this button to enter Multi mode or Global mode. This button also switches the mode between
Multi mode and Global mode. In Multi mode, the indicator lights up; in Global mode, the indicator
flashes.
8 [EDIT] button
In Program Play mode, press this button to select the Program Edit mode. In Combination Play
mode, press this button to select the Combination Edit mode.
9 Power switch
This switch is used to power on and power off the X5DR.
0 MIDI indicator
This indicator lights up when the X5DR receives MIDI data via the MIDI IN jack or the TO HOST
jack.
A LCD
This visual interface displays the current Program name and Combination name in Program Play
mode and Combination Play mode, respectively. In other modes, it displays parameters.
B PHONES jack
Connect the headphones to this stereo mini jack.
To Next Page
Loading...
Need help?
General
