KRAL BEM 500 - Menu Description; Menu Structure

11 Menu description
11.1 Menu structure
Aim Operating steps
Check the values
for the K-factors,
see Menu5: K-
factors flow-
meterB
1. With or select menu.
2. With or select menu item.
Call up alarms, see
Menu 8: Alarms
1. With and. Select menu.
2. With or Call up existing alarms.
11 Menu description
11.1 Menu structure
No. Menu Information
1 Display
o 1.00Information
o 1.01Consumption display
o 1.02Display total
o 1.03Display VolumeterA
o 1.04Display VolumeterA Total
o 1.05Display VolumeterB
o 1.06Display VolumeterB Total
o 1.07Filling amount
o 1.08Display direction change VolumeterA
o 1.09Display direction change VolumeterB
o 1.10Display reset bypass and group error message
o 1.11Setting Display brightness
o 1.12Setting Display contrast
o 1.13Setting Select language
o 1.30Setting Enter password
o 1.31Help on operation
2 General settings
o 2.01Setting Enable password
o 2.02Setting Change password
o 2.03Setting Select mode
o 2.04Setting Select temperatureX
o 2.05Setting Select unit rate
o 2.06Setting Select unit total
o 2.07Setting Select unit temperature
o 2.08Setting Select unit density
o 2.09Setting Select density determination
o 2.10Setting Number of decimal places
o 2.11Setting Display start message
o 2.12Setting Function pick up
o 2.13Setting Function pulse Inputs
o 2.14Setting Link channel
o 2.15Setting Threshold value A-B
o 2.16Setting Averaging display rate average
o 2.17Setting Deactivate alarm messages
o 2.18Setting Maximum flow rate error message
o 2.19Setting Minimum temperature volumeter
o 2.20Setting Maximum temperature volumeter
o 2.21Setting Reset to factory setting
26
OIE 12en-GB Edition 2020-03
Operating instructions