BA 35203_04 * 3.0 * 35203_04_04_Inbetriebnahme_04.fm 4-37
Putting into operation 4
Digital display on indicating instrument
The display instrument is equipped with a warning sound display as well
as a digital display 63. The digital display provides information on active
functions, current operating states, service information, machine status
and error codes.
Accident hazard when operating the digital display during machine
travel!
Can cause serious injury or death.
► Stop the machine before operating the digital display.
Operation of digital display
The following table gives an overview of the menu structure of the digital
display.
Push button 61 takes you through the indications of the 1st level.
Push button 62 takes you to the 2nd level.
Example:
Proceed as follows in order to leave the Main indication 1 and to go to
the Service indication:
1. Press the 61 touch button once.
➥ Main indication 1 appears.
2. Press the 62
touch button once.
➥ The service indication appears.
1st level 2nd level
Main indication 1 Service indication
Main indication 2 –
Machine status indication HMI –
Machine status indication VCU –
Machine status indication ECU
• Ash = ash load, Soot = soot load
• DEF = urea capacity
• l/h = fuel consumption
Error memory –
Digital display settings –
To Next Page
Loading...
