BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm 7-89
Maintenance 7
7.22 Machine preservation
Anticorrosion protection (option)
The machine can be specially protected against corrosion for work in
aggressive media (for example, in a saline environment).
However, this anticorrosion protection is affected by external factors, for
example dirt, cleaning, etc. This is why it only has ongoing effect if
checked at regular intervals and renewed or reapplied as required.
If no anticorrosion protection is applied to the machine, for example for
work in a saline environment, we recommend retrofitting your machine
with this option by a sales partner.
The following anticorrosion protection is used:
Components coated with anticorrosive wax
Designation:
Elaskon 2000 ML, Elaskon UBS light
Elaskon Aero 46 spezial, Elaskon Multi 80
Manufacturer:
ELASKON Sachsen GmbH & Co. KG, Dresden
(Germany)
Component Remarks
All electric plug
connections, ground
contacts and crimp
connections
Before applying the wax:
• Apply contact spray to contact surfaces
and connect the plug-and-socket
connections again.
• Apply a particularly thick anticorrosion
layer to the connecting parts of the fuel
level transmitter.
All parts of the machine,
for example
Axles, gearbox,
trim panels, servicing lids,
loader unit, quickhitch
Except:
• Piston rods (chromium coating)
• Cabin, cabin bearings
• Engine cover, engine mounting
• Air filter
• Counterweight
• Fastening surfaces for installing parts on
chassis
• Radiator and insulating mat
• Mudguards, rubber and plastic parts
• Light elements
Flange surfaces
for example axles, diesel engine and
cabin bearing:
• Seal gaps with anti-corrosion wax after
assembly.
To Next Page
Loading...
