5-74 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
5.11 Work operation
Hose burst valve (option)
Important safety instructions
The hose burst valve prevents the loader unit from being lowered or tilted
out without being braked, in the event of a bursting hose or pipe!
If a hose bursts, the lift or tilt rams are blocked and cannot be operated.
Accident hazard when lowering the loader unit in an emergency!
Can cause serious injury or death!
► Secure the danger zone.
► Do not try to repair the machine under a raised load.
► Perform emergency lowering with extreme care.
In the event of a bursting hose or pipe on the loader unit
1. Stop the machine immediately.
2. Apply the parking brake.
3. Stop the engine and remove the starting key.
4. Secure the danger zone.
5. Perform emergency lowering if this is possible without any danger
– see “Emergency lowering of loader unit in case of diesel engine
breakdown” on page 5-104.
6. Have a burst hose or pipe and the hose burst valve immediately
repaired by an authorized service centre.
Collect the hydraulic oil as it drains with a suitable container (if this can
be done without any danger) and dispose of it in an environmentally
friendly manner.
To Next Page
Loading...
