BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-73
Operation 5
Pallet forks
Fields of application of pallet forks
• The pallet forks are mainly used for picking up, transporting and
loading palletized material, pallets and other stacked material.
• Pallet forks with fixed fork arms are not certified for machine travel on
public roads in Germany.
• Pallet forks with foldable fork arms are authorized for transport on
public roads. The fork arms must be raised
– see “Instructions for machine travel on public roads” on page 4-52,
– see “Preparing machine travel on public roads” on page 4-53.
• Observe and follow the legal regulations of your country.
• In addition, observe the applicable national regulations relevant to
accident prevention, for example the UVV regulations for accident
prevention of the German social insurance against occupational
accidents.
The load diagram (on the left on the front window) is valid only for
applications with the released pallet forks and corresponding tyre size and
pressure.
The load diagram also applies to attachments released by Kramer if the
specified capacities and material densities are observed
– see chapter 3 “Use of attachments on the machine” on page 3-11
Pay attention to the specific load diagrams of other attachments used
– see “Fitting attachments from other manufacturers (option)” on
page 5-99!
Installing and removing the attachment is described in the following
sections:
– see “Pick up the attachment” on page 5-58,
– see “Lower the attachment” on page 5-62.
Work operation with attachment – see “Work operation” on page 5-74.
To Next Page
Loading...
