BA 35203_04 * 3.0 * 35203_04_03_Einleitung.fm 3-11
Introduction 3
Use of attachments on the machine
The attachments will decide in the first place how the machine is used.
• Different quickhitches are available for the machine. Refer to the
following tables for the corresponding attachments and the specific
requirements:
- Attachments for Kramer quickhitch on page 3-12,
- Attachments for SKID STEER quickhitch on page 3-19,
- Attachments for EURO quickhitch on page 3-20,
- Attachments for Volvo quickhitch on page 3-21.
• Attachments certified for travel on public roads must also be listed in
the National Type Approval (Germany)/Data Confirmation or in the
licence certificate of self-propelled work machines.
• For attachments that are not listed in the National Type Approval
(Germany), the Data Confirmation (Germany), the registration
documents or the following lists for the specific quickhitch,
get in touch with a dealer for authorization (warranty claims)!
A Separate Certification for Vehicles (Germany) made out by the
appropriate national authorities is required!
• This operator's manual only describes how to install, use and remove
the standard bucket, multipurpose bucket and pallet forks.
- Standard bucket on page 5-71
- Multipurpose bucket on page 5-72
- Pallet forks on page 5-73
- Pick up the attachment on page 5-58
- Lower the attachment on page 5-62
- Refer to the operator's manuals of the attachments for information on
installing, removing and using other attachments.
Get informed on and follow the legal regulations of your country.
To Next Page
Loading...
