5-14 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
5.3 Brake
Brake/inching pedal
Important information on brake/inching pedal actuation
Brake/inching pedal 34 is located on the left in the machine. The brake/
inching pedal is used for two functions:
• Inching – engine speed does not change, however travel speed is
reduced to increase the output of the operating hydraulics.
•Brakes
Accident hazard due to blocked or dirty pedal!
Can cause serious injury or death.
► Keep the brake/inching pedal clean and remove all objects in the area
of the pedal.
Braking with the brake/inching pedal (service brake)
Accident hazard when moving down a slope too fast!
Can cause serious injury or death. Excessive engine speed can cause
damage to the travelling drive or diesel engine.
► Select the next lower speed range before performing downhill
machine travel.
► Reduce engine speed: remove your foot from the accelerator pedal.
► Reduce your travel speed with the brake/inching pedal (intermittent
braking).
1. Check in the rear-view mirror that no one will be hampered.
2. Release accelerator pedal 23 completely.
3. Press down brake/inching pedal 34 with force with your left foot.
To Next Page
Loading...
