BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-15
Operation 5
Performing a brake test
1. After looking in the rear-view mirror and at low speed, press down the
brake/inching pedal 34 and check the braking effect.
➥ A deceleration must be felt in the brake-inch pedal after half the
pedal travel, and the brake lights must light up.
Inching with the brake/inching pedal
1. Press the brake/inching pedal 34 down slightly.
➥ Slightly press the pedal in the inch range. The pedal can be used
like a car’s clutch.
➥ The drive’s output is reduced and the engine power is now available
for the operating hydraulics.
➥ This makes it possible to raise the loader unit more quickly.
The brake lights do not illuminate in the inching range.
To Next Page
Loading...
