Kramer 8115 User Manual

7-24 BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm
7 Maintenance
7.6 Lubrication work
Lubricating the rear axle oscillation-type bearing
Information
Maintenance intervals – see “Maintenance plan” on page 7-3.
Lubricant – see “Fluids and lubricants” on page 7-12.
1. Park the machine on level ground.
2. Apply the parking brake.
3. Secure the machine with a wheel chock.
4. Only raise the loader unit until all zerk fittings can be accessed without
any risk.
5. Stop the engine and remove the starting key.
6. Switch off the battery master switch (option).
7. Lubricate grease zerk A of the oscillation-type bearing.
Information
A "remote lubrication" of the oscillating axle bearing is available. The zerk
fitting on the oscillating axle bearing is connected to a zerk fitting mounted
to the frame via a hose pipe.
Lubricating the planetary drive bearing (front and rear axles)
Information
Maintenance intervals – see “Maintenance plan” on page 7-3.
Lubricant – see “Fluids and lubricants” on page 7-12.
1. Park the machine on level ground.
2. Apply the parking brake.
3. Secure the machine with a wheel chock.
4. Only raise the loader unit until all zerk fittings can be accessed without
any risk.
5. Turn the steering wheel for better access.
6. Stop the engine and remove the starting key.
7. Switch off the battery master switch (option).
8. Lubricate zerk fittings B (2 x on each planetary drive bearing).
Fig. 251
A
Fig. 252
B

Kramer 8115 Specifications

General

Brand	Kramer
Model	8115
Category	Compact Loader
Language	English