5-16 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
Parking brake
Information on the parking brake
The parking brake is located to the right of the control lever base.
A starting interlock prevents the machine from starting even with the
parking brake slightly applied.
Selection of travel direction is not possible unless parking brake is
completely released.
Applying the parking brake automatically cancels the selection of the
forward/reverse travel direction (drive) and switches the drive to neutral.
Applying the parking brake
Applying the parking brake during machine travel abruptly brakes
the machine!
Can cause injury.
► Apply the parking brake only at machine standstill.
► In travel operation use only the brake/inching pedal as a brake.
► Use the parking brake as a secondary brake only in an emergency
(if the service brake breaks down).
1. Lift the lever 26 up.
➥ Indicator light 73 on the indicating instrument illuminates.
➥ The engine can be started.
➥ Selection of forward/reverse travel direction (drive) is automatically
cancelled and neutral activated.
2. Secure the machine with wheel chocks.
Release the parking brake
1. Pull lever 26 up slightly.
2. Press button A.
3. Move lever 26 down as far as it will go.
➥ Indicator light 73 on the indicating instrument goes out.
To Next Page
Loading...
