3-12 BA 35203_04 * 3.0 * 35203_04_03_Einleitung.fm
3 Introduction
Attachments for Kramer quickhitch
Damage to the machine due to the use of uncertified attachments!
► Use only attachments that are certified for the existing quickhitch and
that are fitted with a load diagram certified for the specific attachment.
► If other attachments are used, conformity (stability test) in accordance
with the EC machine guideline or the EN 474-3 standard must be
checked and documented by an authorized service centre.
Machine travel on public roads with a full bucket is prohibited in the
Federal Republic of Germany!
Observe the following for attachments that are not certified for use on
public roads in the Federal Republic of Germany:
► Remove the attachments for transport on public roads.
► Load the attachment on a transport vehicle and transport it to the job
site.
Observe the footnotes in the tables!
• If uncertified attachments are installed, or if parts of the quickhitch or
attachment are subsequently modified or replaced, the operation
license and the warranty become void.
• In addition to the Operator’s Manual, observe and instruct the operator
in all other generally applicable, legal and other mandatory regulations
relevant to accident prevention and environmental protection.
• Please contact your dealer if you require more information on the
quickhitch and the specific attachments.
To Next Page
Loading...
