BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-75
Operation 5
Machine travel on public roads with a bucket
During machine travel on public roads, equip the machine only with
attachments that are certified for this machine
– see chapter 3 “Use of attachments on the machine” on page 3-11.
Machine travel on public roads is prohibited if the distance between the
front edge of the bucket (transport position) and the centre of the steering
wheel is over 3500 mm. The special measures stated in “Merkblätter für
Anbaugeräte” (leaflet with specific instructions for attachments) §30
clauses 10/11/12 StVZO (German traffic regulations) must be observed in
addition.
Machine travel on public roads with a full standard bucket is prohibited in
Germany!
Observe the legal regulations of your country.
Preparing machine travel on public roads
(wheel loader 352-03 S)
1. Empty and dump in the bucket B.
2. Raise the loader unit until red marks D on the lift frame and the
bulkhead are aligned.
➥ Ground clearance C about 250 mm (9.84 in).
3. Lock the steering column in the front position
– see “Steering column height and angle adjustment” on page 5-1.
4. Cover the blade or teeth of the bucket across their entire width with the
tooth guard A provided.
5. Secure the joystick (loader unit) – see “Securing the control lever
(joystick)/switching off the operating hydraulics” on page 4-54.
To Next Page
Loading...
