7-88 BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm
7 Maintenance
Refueling with urea solution
Destruction of the exhaust after-treatment system by filling the urea tank
with other media (e.g. diesel).
► Only fill the urea tank with urea solutions (SCR reducing agents).
► If the urea tank is incorrectly filled, have it emptied and cleaned by an
authorized service center.
► If other media has made its way into the lines or the conveying module,
this must be replaced by an authorized service center.
Collect the escaping urea solution with suitable containers and dispose of
it in an environmentally friendly manner!
If the fill level of the urea solution falls below 15%, the symbol G/4 appears
in the digital display.
➥ Top off urea.
The filler neck is located in the entry on the left side of the machine.
1. Lower the loader unit fully.
2. Apply the parking brake.
3. Stop the engine and remove the starting key.
4. Clean the area around the filler opening.
5. Unlock the lock A with the ignition switch key.
6. Fold down the cover B.
7. Open filler cap C.
8. Fill with urea solution.
➥ Comply with the quality and specification
– see “Specification of the SCR reducing agent” on page 7-15.
9. Close filler cap C.
10.Fold down the cover B and lock with the lock A.
To Next Page
Loading...
