Kramer 8115

5-8 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
Changing over from 4 wheel steering to diagonal steering
1. Stop the machine.
2. Select all-wheel steering. To do this: slide the lock in switch 54
downward and press the switch to position A.
3. Slide the lock on switch 53 downward and press the switch to
position B.
If the symbols E/1 und E/4 appear alternately in the digital display:
4. Turn the steering wheel to the left and/or right until the wheels
of the front and rear axles have reached or passed through the
straight-ahead position from both directions.
➥ Symbol E/4 appears permanently in the digital display.
➥ Diagonal steering is in operation.
Changing over from front axle steering to diagonal steering
Information
Diagonal steering cannot be selected directly from front axle steering!
If diagonal steering is nevertheless selected with the toggle switch 53 with
front axle steering enabled, the machine gently brakes to 10 km/h and
stays in front axle steering. In addition, a buzzer sounds and the
symbols E/2 and E/4 flash in the digital display.
1. In order to change over to diagonal steering, slide the lock in switch 54
downward and press the switch to position A.
2. Turn the steering wheel to the left and/or right until the wheels of the
front and rear axles have reached or passed through the straight-
ahead position from both directions.
➥ Symbol E/4 appears permanently in the digital display.
➥ Diagonal steering is in operation.
Fig. 106
53
B
54
A
41
E
Fig. 107
53
B
54
A
4
2
E