BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-11
Operation 5
Setting engine speed/enabling manual throttle
Danger of accident due to fast acceleration of the machine!
Can cause serious injury or death.
► When starting with the activated manual throttle, make sure that no
people or objects are in the danger area.
➥ If the manual throttle has been activated and then a travel direction
is chosen with the rocker switch in the joystick, the vehicle
accelerates according to the saved speed.
In the "hare" speed, the saved engine speed is deleted after the manual
throttle function is disabled and cannot be retrieved again.
Engine speed can be increased with the accelerator pedal as required. If
the accelerator pedal is not pressed any more, the engine speed is reset
to the value last saved.
1. Select the speed and the desired steering mode.
2. Set the travel direction to neutral. Press touch button 88 on the joystick
to do this.
➥ Symbol D/3 appears in the digital display.
3. Select the required engine speed with the accelerator pedal.
➥ The current engine speed I appears in the digital display.
4. Press manual throttle regulator 31 forward A for at least 3 seconds.
➥ The engine speed is saved.
5. Adapt the engine speed as required by (repeatedly) tapping the
manual-throttle regulator 31:
➥ forward A – speed is increased
➥ Backward B – engine speed is reduced
6. Select the travel direction with switch 87 on joystick.
➥ The machine accelerates according to the preselected engine
speed.
To Next Page
Loading...
