5-26 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
High beam/headlight flasher
Accident hazard due to blinded motorists!
During machine travel on public roads, the activated high beam or flashing
headlights can blind other motorists. This can cause serious injury or
death.
► Switch off high beam or the headlight flasher in time during machine
travel on public roads.
► Observe the national regulations.
High beam and the headlight flasher are operated with multifunctional
lever 5. The multifunctional lever is located on the left of the steering
wheel.
High beam operation Function
ON
1. Press switch 48 to
position B.
2. Pull the multifunction
lever 5 toward the
steering wheel and
release it.
➥ High beam and control
lamp 78 light up.
OFF
Pull the multifunction lever
5 again toward the steering
wheel and release it.
➥ The high beam and
control lamp 78 go out.
Headlight flasher operation Function
ON
Pull the multifunction
lever 5 at short intervals
toward the steering wheel.
➥ High beam and control
lamp 78 light up.
To Next Page
Loading...
Need help?
General
