5-48 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
Additional control circuit for a tipping trailer (option)
Only tipping trailers with single-action tilt rams can be operated with this
option.
Important information on the additional control circuit for tipping
trailers
Connecting the flexible lines incorrectly results in incorrect
operation and/or uncontrolled movements of the attachment!
Failure to observe this can cause serious injury or death.
► Ensure that the flexible lines of the attachment are correctly connected
to the machine.
► Follow the instructions in the Operator’s Manual of the attachment
manufacturer.
► Check the response direction of the control elements before using the
attachment.
Accident hazard!
No attachments must be connected to the flat connector plugs “Additional
front control circuit” (A, B, C, E) before putting the tipping trailer into
operation!
► Uncouple the attachments.
► Close the plug couplings with protective caps.
In order to avoid leaks on the flat connector plugs and dirt in the hydraulic
oil:
► carefully clean the plug couplings and flexible lines before connecting
them.
Damage hazard to the machine and/or the attachment!
► Check the flow rate of the attachment before putting it into operation.
► Observe the operator’s manual of the attachment.
► When removing the attachment, always ensure that all hydraulic lines
are disconnected.
To Next Page
Loading...
