Kramer 8115

5-126 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
Operation of low-speed control
Fig. 233
kph0
rpm
0
III
IV
0
bar
H
32
A
B
31
I
Operation Lever position Result
Select the “Turtle”
speed range.
– see “Changing speed range” on page 5-19.
Activate the low-speed
control function.
1. Pull the slide
control 32 all the way
to the rear (B).
➥ Driving speed =
20 km/h (0 mph).
2. Set the engine speed
via the manual throttle
controller 31 to the
speed required for the
attachment
– see “Manual throttle
(option)” on
page 5-10.
➥ The speed I is
shown in the
display (rpm).
3. Select a travel
direction.
➥ Driving speed =
20 kph (0 mph).
Select the driving
speed.
Push the slide control 32
forward A until the
desired speed is
achieved.
➥ The speed H is
shown in the
display (km/h).
➥ The speed is
largely self-
contained of the
driving resistance.