BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-133
Operation 5
Operating the load stabilizer
The load stabilizer can be used in automatic and continuous mode.
• The load stabilizer in automatic operation is suitable for longer trips
off-road as well as on public roads or for minor work off-road. It is
switched on and off by means of a driving speed control.
➥ Driving speed over 15 kph (9.3 mph) => ON
➥ Driving speed below 15 kph (9.3 mph) => OFF
• The load stabilizer in continuous operation is suitable for longer trips
off-road as well as on public roads.
• Switch off the load stabilizer for heavier duty loading work.
Switch 51 for load stabilizer operation (option) is located on the switch
console on the left beside the steering wheel.
Depending on the load, the loader unit can rise or go down slightly as you
switch on the load stabilizer!
Reversing fan (option)
Pressing the touch button 56 reverses the direction of rotation of the fan
and cleans the radiator and maintains the temperature of the engine and
hydraulic oil radiator at an optimal level.
Push button (56) for automatic cleaning is located on the switch console
on the right.
Clean the radiator – see chapter 7 “Cleaning the radiator with the
reversing fan (option)” on page 7-39.
Load stabilizer operation Function
AUTO
Press switch 51 to
position A.
➥ Load stabilizer in automatic mode.
➥ Symbol N appears in the digital
display during machine travel over
15 km/h (9.3 mph), and disappears
during machine travel below
15 km/h (9.3 mph).
OFF
Press toggle switch 51
to middle position C.
➥ Load stabilizer out of operation.
➥ Symbol N disappears from the
digital display.
ON
Press switch 51 to
position B.
➥ Load stabilizer in continuous
operation.
➥ Symbol N appears in the digital
display.
To Next Page
Loading...
