BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-135
Operation 5
Putting out of operation for a longer period of time
1. If possible, retract the piston rods of the hydraulic cylinder to protect
them against damage. If this is not possible, apply grease to the piston
rods
2. and to the bare parts of the hydraulic cylinders that are not paint-
coated.
3. Before putting the machine into operation, clean the piston rods,
however not with a grease solvent or a high-pressure cleaner.
➥ The scraper bar is not water resistant. Water can therefore
penetrate the guide bushings. This leads to rust formation and
therefore damage to the piston rod.
Preserving the diesel engine
• Preserving inside
• Preserving outside
Preserving work may be performed by an authorized service centre only!
To Next Page
Loading...
