BA 35203_04 * 3.0 * Sicherheit.fm 2-17
Safety 2
Modifications and spare parts
• Do not modify the machine and the work equipment/attachment
(for example, the safety devices, lighting, tires, straightening and
welding work).
• Modifications must be approved by the manufacturer and performed by
an authorized service center.
• Use only original spare parts.
Protective structures
• The cabin, rollbar and protective screen are tested protective structures
and may not be modified (for example no drilling, bending, welding).
• Perform a visual check according to the maintenance plan
(for example check the fastenings for damage).
• If damage or defects are detected, have them immediately checked
and repaired by an authorized service center.
• Have retrofitting work only performed by an authorized service center.
• Replace self-locking fasteners (for example self-locking nuts) by new
ones after removing them.
To Next Page
Loading...
