BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm 7-33
Maintenance 7
Adding engine oil
Loss of output and engine damage due to wrong engine-oil level, and
wrong or used engine oil.
► The oil level must not drop below the "Min." mark on the oil level
dipstick.
► The oil level must not rise above the "Max." mark on the oil level
dipstick.
► Observe the intervals for engine-oil and filter replacement.
► Observe the specifications and fill quantities.
1. Park the machine on level ground.
2. Stop the engine and remove the starting key.
3. Apply the parking brake.
4. Open the engine cover.
5. Clean the area around oil filler cap A with a lint-free cloth.
6. Open the sealing push-in cap A.
7. Pull out oil level dipstick B and wipe it with a lint-free cloth.
8. Add engine oil.
9. Wait a moment until all the oil has run into the oil sump.
10.Check the oil level with oil level dipstick B – see “Checking the engine
oil level” on page 7-32.
11.Add oil if necessary and check the oil level again.
12.Close filler cap A.
13.Completely remove all oil spills from the engine.
Use a suitable container to collect the engine oil as it drains and dispose
of it in an environmentally friendly manner!
Maintenance intervals – see “Maintenance plan” on page 7-3.
Specifications and fill quantities – see “Fluids and lubricants” on
page 7-12.
To Next Page
Loading...
