7-58 BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm
7 Maintenance
Cleaning the heat exchanger (condenser)
Check and clean the heat exchanger once a day in order to ensure the
correct function of the air conditioning. During mowing and mulching
operation, clean the heat exchanger and the protective screen more
frequently because of the increased dust (plant particles).
Injury hazard due to hot and moving engine parts!
Hot and moving engine parts can cause injury.
► Do not open the engine cover if the engine is running.
► Let the engine cool down.
► Wear protective equipment.
Damage to the heat exchanger due to cleaning.
► Do not use high-pressure cleaners or compressed air.
1. Apply the parking brake.
2. Stop the engine and remove the starting key.
3. Remove battery cover A from the counterweight.
4. Remove screws B and pull heat exchanger C backward, or lower it.
5. Clean the heat exchanger with a water jet.
6. Clean the air intake area.
7. Bring the heater box C in the initial position and attach screws B.
8. Install intake screen A onto the counterweight.
To Next Page
Loading...
