8-2 BA 35203_04 * 3.0 * 35203_04_08_Betriebsstoerung.fm
8 Malfunctions
Engine overheats.
Temperature warning system
responds
Oil level too low
Add engine oil, observe the engine
oil specification.
7-31
Oil level too high Contact an authorized service centre. –
Dirty air filter Replace the air filter. 7-40
Malfunctioning air filter maintenance
switch or gauge
Contact an authorized service centre. –
Dirty oil/water radiator fins Clean the radiator. 7-34
Malfunctioning fan, torn or loose
V-belt
Retension the V-belt
Contact an authorized service centre.
7-42
Malfunctioning fuel injector –
Insufficient engine power
Oil level too high Contact an authorized service centre. –
Fuel grade does not comply with
specifications
Observe fuel specification when
adding fuel.
7-27
Dirty air filter Replace the air filter. 7-40
Malfunctioning air filter maintenance
switch or gauge
Contact an authorized service centre.
–
Wrong valve clearance –
Injection line leaks –
Malfunctioning fuel injector –
Malfunctioning diesel particulate
filter
–
Soot load of diesel particulate filter
is too high
Regenerate the diesel particulate
filter.
7-73
Insufficient or no engine oil
pressure
Oil level too low
Add engine oil, observe the engine
oil specification.
7-31
Engine inclination too high Move machine out of inclination. –
Wrong SAE grade of engine
lubrication oil
Contact an authorized service centre.
Observe engine oil specification.
7-12
Engine oil consumption too
high
Oil level too high
Contact an authorized service centre.
–
Malfunctioning piston rings –
Engine inclination too high Move machine out of inclination. –
Low-load operation of engine Avoid too long engine idle times. –
Diesel engine malfunctions Possible causes Remedy/avoidance See
To Next Page
Loading...
