Kramer 8115

3-14 BA 35203_04 * 3.0 * 35203_04_03_Einleitung.fm
3 Introduction
Non-approved attachments for machine travel on public roads (Federal Republic of Germany)
Side swing bucket
2, 9
352-03 S 1000176121
1844 (72.59)
without RZ
0,6 / 0,75
(21.18 / 24.72)
Standard bucket,
however with benefits
for filling and backfilling
material (material density
p = 1.8 t/m³ (112 lb/ft³))
High tip bucket
2, 9
352-03 S
1000290188
1000154475
1000244915
10
1400 (55.12)
without RZ
1850 (72.83)
without RZ
1750 (68.90)
without RZ
–
As standard bucket,
however with a
80 – 100 cm higher tilt
height (material density
 p = 1.3 t/m³ (81 lb/ft³))
Pallet forks 352-03 S
1000237357
1000237358
1000 (24.72)
1200 (47.24)
–
Picking up and t
ransporting pallets
Pallet forks
(hydraulic lateral
displacement)
2
352-03 S 1000247565 1200 (47.24) –
Picking up and
transporting pallets
Pallet forks
(floating fork arms)
2
352-03 S 1000177240 1000 (39.37) –
Material pusher
2
352-03 S
1000330950 3000 (118.11) –
For moving loose bulk
material
1000330961 4000 (157.48) –
Round bale clamp
2
352-03 S 1000177701
800 – 1800
(31.49 – 70.86)
–
Picking up and
transporting silage,
straw and hay bales
Attachment
Machine
model
Part no.
(model )
Dimension
mm (in)
Capacity
1
m
3
(ft3)
Use