Kramer 8115

4-10 BA 35203_04 * 3.0 * 35203_04_04_Inbetriebnahme_01.fm
4 Putting into operation
Backrest adjustment
1. Sit down on the operator seat.
2. Pull lever E upward and at the same time, lean back to push the
backrest into the required position.
3. Allow lever E to engage.
Horizontal adjustment with control lever base
1. Sit down on the operator seat.
2. Pull lever D up and at the same time, move the operator seat forward
or backward.
3. Allow lever D to engage in the required position
Horizontal adjustment without control lever base
1. Sit down on the operator seat.
2. Pull lever A up and at the same time, move the operator seat forward
or backward.
3. Allow lever A to engage in the required position.
Fig. 57
E
Fig. 58
D
Fig. 59
A