KROHNE OPTISONIC 8300 - Default Chapter; Table of Contents

CONTENTS
2
www.krohne.com 03/2020 - 4008065101 - QS OPTISONIC 8300 R01 en
OPTISONIC 8300
1 Safety instructions 3
2 Installation 4
2.1 Scope of delivery............................................................................................................... 4
2.2 Device description ............................................................................................................ 5
2.3 Nameplates ...................................................................................................................... 6
2.3.1 Example of nameplate for the flow sensor ............................................................................ 6
2.3.2 Examples of nameplates on the signal converter (field housing) ......................................... 6
2.4 Storage ............................................................................................................................. 8
2.5 Transport .......................................................................................................................... 8
2.6 Pre-installation requirements ......................................................................................... 8
2.7 General requirements...................................................................................................... 9
2.7.1 Vibration .................................................................................................................................. 9
2.8 General requirements sensor........................................................................................ 10
2.9 Installation conditions ....................................................................................................10
2.9.1 Inlet and outlet...................................................................................................................... 10
2.9.2 T-section ............................................................................................................................... 10
2.9.3 Flange deviation.................................................................................................................... 11
2.9.4 Mounting position.................................................................................................................. 12
2.9.5 Thermal insulation................................................................................................................ 13
2.10 Mounting the field housing, remote version ................................................................ 14
2.10.1 Wall mounting ..................................................................................................................... 14
2.10.2 Turning the display of the field housing version ................................................................ 15
3 Electrical connections 16
3.1 Safety instructions.......................................................................................................... 16
3.2 Connection of signal cable to signal converter.............................................................. 16
3.3 Power supply connection ............................................................................................... 18
3.4 Laying electrical cables correctly .................................................................................. 19
3.5 Inputs and outputs, overview ......................................................................................... 20
3.5.1 Combinations of the inputs/outputs (I/Os) ........................................................................... 20
3.5.2 Description of the CG number .............................................................................................. 21
3.5.3 Fixed, non-alterable input/output versions.......................................................................... 22
3.5.4 Alterable input/output versions............................................................................................ 23
4 Technical data 24
4.1 Dimensions and weight .................................................................................................. 24
4.2 Converter housing ..........................................................................................................25
4.3 Mounting plate of field housing...................................................................................... 25
5 Start-up 26
5.1 Switching on the power .................................................................................................. 26
5.2 Starting the signal converter ......................................................................................... 26
5.3 Menu overview................................................................................................................ 27
6 Notes 31