Operation
46
Pos: 20.17 /Überschrif ten/Überschrif ten 2/U-Z/Zi nkenarme in Arb eitstellung sch wenken @ 2\ mod_1202709358 751_78.doc @ 5 9873
8.8 Swivel tine arms to working position.
Pos: 20.18 /BA/Sic herheit/Gefahre nhinweise/Ei nstellarbeiten gez ogene Maschi nen @ 0\mod_ 1199717011038 _78.doc @ 339 80
Danger! - Unexpected movements of the machine
Effect: Danger to life or serious injuries.
• Setting tasks must only be performed when the drive is switched off and the engine is at
a standstill!
• Switching off the engine
• Remove the ignition key.
• Secure the machine against the possibility of rolling back.
Pos: 20.19 /BA/Be dienung /Sch wader/Kreiselarreti erung lösen @ 2 \mod_1202 710257642_78. doc @ 59935
SW700036
1
2
3
3
1
Fig. 20
• Move rotors from transport to working position (See Chapter on Operation "From
transport to working position").
• Release rotor locking device, then detach the tension spring (1) from the fastening clamp
(2) of the tines and attach to fastening hole (3).
Pos: 20.20 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65
To Next Page
Loading...
