Krone Swadro 810 - Switching from Two Individual Swaths to One Side Swath (Swadro 810)

Operation
60
Pos: 20.63.7 /B A/Bedienung /Sc hwader/Umstelle n von zwei Ei nzelschwade auf ei nem Seitensch wad (Swadr o 810) @ 2\mod _1202742579 142_78.doc @ 609 10
8.21 Switching from Two Individual Swaths to One Side Swath (Swadro 810)
SW810016
2
1
Fig. 35
• Fold over the front swath cloth for single swath
• Pull out the hinged cotter pin (1)
• Pull the swath cloth (2) out of its support and into the support that is offset 90° and to the
front.
• Secure in place with the hinged cotter pin.
• Lift the rotors by activating the single-action control unit in headland position.
• Charge the double-action control hydraulics with pressure and slowly move the rotors
completely together.
Pos: 20.64 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65