Krone Swadro 810 - Moving Hoop Guards to Working Position

Operation
48
Pos: 20.24.1 /Üb erschriften/Üb erschriften 2/P-T/S chutzbügel in Ar beitsstellung bri ngen @ 2\ mod_120297223 1499_78.doc @ 6 3393
8.9 Move the hoop guards to the working position.
Pos: 20.24.2 /B A/Sicherheit/Gefa hrenhinweise/Q uetschgefahr @ 2\mod_120 2971999343_78.d oc @ 63374
Warning - Crush hazard!
Effect: Injury to hands
Do not hold onto hoop guards to swivel within range of the rotating points.
Pos: 20.24.3 /B A/Bedienung /Sc hwader/Schutz bügel/Schutzb ügeli n Arbeitsstellu ng bringen Bil d SW 807/810/ 907 @ 2\mod_ 1202972322640 _78.doc @ 634 12
SW810024
1
2
3
Fig. 22
Pos: 20.24.4 /B A/Bedienung /Sc hwader/Schutz bügel/Schutzb ügeli n Arbeitsstellu ng bringen T ext @ 2\mod_ 1202712604095_7 8.doc @ 59973
Swivel the side hoop guard (1) on the front left and right of the machine outward in the working
position and lock in place with a socket pin (2). Secure socket pin (2) with spring cotter pin (3).
Pos: 20.25 /BA/Be dienung /Sch wader/Hinweis Sc hutzbügel in Arbeitsstellung bringen Swadro 9 00 @ 2\mod _1202832570 357_78.doc @ 620 41
Note
For the Swadro 907, swivel only the right hoop guard (1) into working position and lock it in
place.
Pos: 20.26 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65