Lumio service manual
92
MAINTENANCE
If the container
needs to be emp-
tied, push the selection
lever to the middle posi-
tion. To continue with
descaling, push the selec-
tion lever back into the
previous position.
22. Rinse and clean water tank. Use a
clean food-safe brush and washing-
up liquid as needed.
23. Afterwards refill water tank with fresh
drinking water and insert it back into
machine.
24. Push selection lever to the right
“HOT” position.
25. Machine starts rinsing with hot water.
26. Wait until selection lever moves back
to the middle "STOP" position.
27. Push selection lever to the left
“COLD” position.
28. Machine starts rinsing with cold water.
29. Wait until selection lever moves back
to the middle "STOP" position.
30. Remove, empty and clean container.
31. Open locking handle and remove
capsule holder.
32. Open capsule holder and remove
rinsing tool.
33. Rinse capsule holder with fresh
drinking water from both sides.
34. Reinsert capsule holder and close
locking handle.
35. Remove and dry water tank.
36. Reinsert water tank.
37. Clean machine with a soft damp
cloth.
38. Dry it afterwards with a soft dry cloth.
To Next Page
Loading...
