KTM 1290 SUPER DUKE R 2021 User Manual

SERVICE WORK ON THE ENGINE 19
149
S03959-10
–
Remove screws
2
. Take off oil filter cover
3
with the O-
ring.
S03960-10
–
Pull oil filter
4
out of the oil filter housing.
Lock ring plier (51012011000)
– Allow the engine oil to drain completely.
– Thoroughly clean the parts and the sealing surfaces.
S03961-10
–
Insert new oil filter
4
.
Info
Only insert the oil filter by hand.
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
3
.
S03959-11
–
Mount and tighten screws
2
.
Guideline
Remaining engine
screws
M5 6 Nm (4.4 lbf ft)
100773-12
–
Thoroughly clean magnets
A
and oil screens
B
of the oil
drain plugs.

KTM 1290 SUPER DUKE R 2021 Specifications

General

Displacement	1301 cc
Transmission	6-speed
Rear Suspension	WP APEX monoshock, fully adjustable
Seat Height	835 mm
Fuel Tank Capacity	16 liters
Dry Weight	189 kg
Bore x Stroke	108 mm x 71 mm
Compression Ratio	13.5:1
Fuel System	Electronic fuel injection
Lubrication	Forced oil lubrication with 3 oil pumps
Wheelbase	1482 mm
Traction Control	MTC (Motorcycle Traction Control), lean-angle sensitive
Engine Type	V-Twin, 4-stroke
Power	180 hp
Torque	140 Nm @ 8000 rpm
Frame	Chromium-Molybdenum steel frame, powder coated
Front Suspension	WP APEX 48
Front Brake	320 mm discs
Rear Brake	Brembo two-piston caliper, 240 mm disc
Clutch	PASC slipper clutch, hydraulically actuated
ABS	Bosch 9.1 MP (incl. Cornering ABS and Supermoto mode)