Why does the engine only turn if the clutch lever is drawn on my KTM Motorcycle?
If the engine of your KTM Motorcycle only turns when the clutch lever is drawn, it could be because the vehicle is in gear, so shift the transmission into neutral.
General| Displacement | 1301 cc |
|---|---|
| Bore x Stroke | 108 mm x 71 mm |
| Starter | Electric |
| Transmission | 6-speed |
| Seat Height | 835 mm |
| Fuel Capacity | 16 liters |
| Dry Weight | 189 kg |
| Front Tire | 120/70 ZR17 |
| Rear Tire | 190/55 ZR17 |
| Lighting | LED |
| Riding Modes | Sport, Street, Rain, Track |
| Engine Type | V-twin, 4-stroke |
| Power | 177 hp (132 kW) @ 9500 rpm |
| Torque | 140 Nm |
| Fuel System | Electronic fuel injection |
| Cooling System | Liquid Cooled |
| Frame | Trellis frame, chrome-moly |
| Front Suspension | WP APEX 48 |
| Rear Suspension | WP Apex, adjustable |
| Front Brake | Dual 320 mm discs |
| Rear Brake | 240 mm disc |
| ABS | Bosch 9.1MP 2.0 (Cornering ABS with Supermoto mode) |
| Traction Control | MTC (Motorcycle Traction Control) |
| Ground Clearance | 150 mm |
| Instruments | TFT display |
| Quick Shifter | Yes |
Explains the meaning of various symbols used in the manual for clear communication.
Explains the typographical formats used throughout the document for consistency.
Describes the intended use and limitations of the vehicle for safe operation.
Explains danger, warning, caution, and note symbols to highlight risks.
Shows and labels different warning and information stickers on the motorcycle.
Instructions for reporting vehicle safety defects to authorities and manufacturer.
Warns against tampering with the noise control system and lists prohibited acts.
Provides safety advice regarding accidents and poisoning from exhaust gases.
Emphasizes the importance of protective gear for rider safety.
Outlines general rules and precautions for performing work on the vehicle.
Explains warranty void conditions and requirements for service.
Provides guidelines on using correct fuels and auxiliary substances.
Advises on using approved spare parts and accessories for safety.
Highlights the importance of regular service for optimal operation and longevity.
Identifies key components of the motorcycle from the front left view.
Identifies key components of the motorcycle from the rear right view.
Explains where to find the VIN on the vehicle and type label.
Indicates the location of the type label for USA models on the steering head.
Explains where to find the key number on the KEYCODECARD for spare keys.
Shows the location of the engine number stamped on the engine.
Indicates the location of the fork part number stamped on the axle clamp.
Shows where the shock absorber article number is stamped.
Explains where the steering damper item number is embossed.
Describes the clutch lever's location and hydraulic activation.
Identifies the hand brake lever and its function for the front brake.
Shows the location of the throttle grip on the handlebar.
Locates the combination switch on the left handlebar.
Explains the operation of the light switch for low and high beam.
Details the function of the menu buttons for controlling the instrument display.
Explains the function and operation of the turn signal switch.
Explains the operation of the cruise control buttons for speed adjustment.
Describes the function and activation of the hazard warning flasher.
Explains the operation of the kill switch and starter button.
Details the function of the RACE-ON button for ignition and steering lock.
Describes how the steering lock works with the remote key.
Explains the electronic immobilizer system for vehicle security.
Details the functions of the RACE-ON key and the black ignition key.
Provides safety instructions and steps for opening the fuel tank cap.
Locates the seat lock and how it can be unlocked.
Shows the location of the shift lever and gear positions.
Explains the side stand's location and its relation to the safety starting system.
Introduces the combination instrument and its layout.
Explains how the instrument activates and performs a self-test.
Describes the automatic and manual adjustment of display brightness.
Explains how warnings are displayed and their relevance (yellow/red).
Details the ice warning function based on ambient temperature.
Provides an overview of all indicator lamps on the instrument cluster.
Shows the layout and components of the main instrument display.
Explains the optional TRACK display layout for performance settings.
Describes the optional performance layout for displaying vehicle data.
Explains the small widget for displaying concise information.
Describes the large widget for displaying detailed vehicle information.
Explains how to display and access odometer and trip information.
Explains the integrated shift warning light and its settings.
Describes the indicator for the cruise control system's status.
Shows how the ABS mode is displayed and configured in the menu.
Explains how the selected riding mode is displayed.
Describes the bar indicator for coolant temperature and related warnings.
Explains the bar indicator for fuel level and its update behavior.
Explains where the ambient air temperature is displayed and how to configure units.
Explains how to configure and display favorite information in widgets.
Describes the navigation display in small and large widgets.
Explains how to open and navigate the main menu using the buttons.
Details how to activate and use the KTM MY RIDE function for connectivity.
Explains how to control audio playback via the instrument and connected devices.
Guides on activating and configuring the navigation function via the app.
Describes how to access arrival time and distance to destination.
Details the process for pairing cellphones and headsets via Bluetooth.
Explains how to accept/reject calls and manage volume.
Describes the Trip 1 function for tracking distance and fuel consumption.
Explains the Trip 2 function for tracking journey time and average speed.
Shows how to access date, ODO, battery voltage, and oil temperature.
Explains the Tire Pressure Monitoring System and its importance.
Details how to access and view warning messages on the display.
Shows how to check the next service interval on the display.
Lists and explains how to access optional extra functions.
Explains how to select and configure different ride modes (TRACK, SPORT, STREET, RAIN).
Details the TRACK mode settings and how to exit it.
Explains how to adjust throttle response characteristics in different modes.
Explains the Anti Wheelie Mode function and its safety implications.
Details how to activate and use Launch Control, including safety warnings.
Overview of settings for ABS, traction control, and extra functions.
Explains how to select and configure heated grip levels.
Explains how to select and configure seat heater levels.
Details the MTC (Traction Control) and MSR (Motor Slip Regulation) functions.
Explains ABS modes (Road, Supermoto) and their functionality.
Explains how to activate/deactivate the Quickshifter + function.
Overview of general settings for units, values, and function enablement.
Explains how to assign quick access functions to C1 and C2 buttons.
Details how to enable and use the Bluetooth function for connectivity.
Explains how to configure whether a Bluetooth or wired headset is used.
Explains how to select between automatic and night display modes.
Describes how to adjust the brightness of the button lighting.
Explains the shift warning light settings and activation.
Discusses the daytime running light function and its limitations.
Guides on how to set the clock and date on the instrument.
Explains how to set units for distance, temperature, pressure, and consumption.
Details how to select display units for distance (km/miles).
Explains how to select display units for temperature (Celsius/Fahrenheit).
Explains how to select display units for pressure (bar/psi/kPa).
Explains how to select display units for fuel consumption.
Details how to change the display language of the instrument.
Explains how to activate/deactivate heated grips and control intensity.
Explains how to activate/deactivate seat heater and control intensity.
Explains how to switch between information displays in the small widget.
Explains how to access and view all information in the large widget.
Describes the KTM MY RIDE widget for displaying phone status.
Explains the NAVIGATION widget for route guidance and arrival information.
Explains how to configure and display favorite information in the widget.
Describes the INFO widget for fuel level, coolant, and range.
Explains how to control heating intensity for seat and grips via the HEATING widget.
Describes the MUSIC widget for controlling audio playback from a connected phone.
Explains how to adjust handlebar position for rider comfort and track use.
Provides instructions and warnings for adjusting the handlebar position.
Guides on adjusting the clutch lever for hand size and comfort.
Guides on adjusting the hand brake lever for hand size and comfort.
Explains how to adjust the position of the foot brake lever's step plate.
Details how to check the shift lever position relative to the rider's boot.
Guides on adjusting the shift lever stub position for optimal shifting.
Explains how to adjust footrest position and switching scheme.
Guides on adjusting the tilt angle of the instrument cluster.
Provides essential advice for preparing the motorcycle before its first use.
Details the engine break-in procedure, including maximum engine speed.
Advises on vehicle weight limits and payload for safe handling.
Lists pre-ride checks for roadworthiness and technical condition.
Provides instructions and safety warnings for starting the motorcycle.
Explains the optional Launch Control function for optimal acceleration.
Describes the procedure for starting off from a standstill.
Guides on using Launch Control for acceleration with safety warnings.
Explains how to use the Quickshifter+ for clutchless gear changes.
Provides advice on gear shifting, riding, and passenger safety.
Explains the MSR (Motor Slip Regulation) function for engine braking.
Gives safety advice and procedures for using the brakes.
Provides instructions and safety measures for stopping and parking the motorcycle.
Offers advice and precautions for transporting the motorcycle.
Provides detailed instructions and safety warnings for refueling.
Lists mandatory service tasks and their intervals (time/mileage).
Lists recommended service tasks and their intervals.
Introduces options for adapting suspension to riding style and payload.
Guides on adjusting the fork's spring preload for different riding conditions.
Explains how to adjust the fork's compression damping.
Guides on adjusting the fork's rebound damping.
Provides steps for bleeding the fork legs, including preparatory and finishing work.
Explains high-speed and low-speed compression damping for the shock absorber.
Guides on adjusting the shock absorber's spring preload.
Explains how to adjust the low-speed compression damping.
Guides on adjusting the high-speed compression damping.
Explains how to adjust the shock absorber's rebound damping.
Provides instructions for lifting the motorcycle using the rear lifting gear.
Details how to safely remove the rear of the motorcycle from the lifting gear.
Guides on lifting the motorcycle using the front lifting gear.
Guides on using a work stand to raise the motorcycle.
Details how to safely remove the motorcycle from the work stand.
Explains the importance and procedure for cleaning fork dust boots.
Provides instructions for removing the passenger seat.
Details the procedure for removing the front rider's seat.
Explains how to remove the left fuel tank spoiler.
Provides instructions and warnings for removing the main silencer.
Details the procedure for cleaning the drive chain with safety warnings.
Explains how to check and set the correct chain tension.
Guides on adjusting the chain tension using the hub housing.
Details how to check wear on drivetrain components.
Explains how to check and correct the hydraulic clutch fluid level.
Introduces the ABS system, its components, and operation modes.
Guides on checking brake disc thickness and condition.
Explains how to check the front brake fluid level and its importance.
Provides instructions and warnings for adding front brake fluid.
Details how to check the front brake linings for wear and damage.
Explains how to check the rear brake fluid level.
Provides instructions and safety warnings for adding rear brake fluid.
Guides on checking rear brake linings for wear and damage.
Details the procedure for removing the front wheel, including brake caliper steps.
Guides on correctly installing the front wheel, including spacers and torque specs.
Explains how to remove the rear wheel, including locking wires and axle nut.
Guides on correctly installing the rear wheel, including axle nut torque.
Explains how to check tires for cuts, damage, tread depth, and age.
Details how to check tire pressure and lists correct pressures for various loads.
Provides instructions and warnings for using tire repair spray, including potential sensor damage.
Explains the DRL function, its integration, and usage with low beam.
Provides safety instructions and steps for removing the 12-V battery.
Guides on correctly installing the 12-V battery with safety warnings.
Provides instructions and precautions for charging the 12-V battery.
Details the procedure for replacing the battery in the RACE-ON key fob.
Explains how to replace the main fuse with safety warnings.
Guides on locating and replacing fuses in the fuse box.
Provides instructions and tips for replacing a turn signal bulb.
Explains how to check and verify the correct headlight beam aim.
Guides on adjusting the headlight beam range for optimal visibility.
Details how to connect a USB cable for device charging or data.
Locates the diagnostics connector under the front rider's seat.
Indicates the location of front ACC power supply sockets.
Provides instructions and safety warnings for checking coolant level.
Guides on how to add coolant and bleed the cooling system.
Explains different ride modes (TRACK, SPORT, STREET, RAIN) and their characteristics.
Explains the MTC function, its activation, and safety implications.
Details the Anti Wheelie Mode function and its purpose.
Explains how to tune traction control via slip adjustment levels.
Describes how to adjust throttle response characteristics.
Provides instructions and conditions for checking the engine oil level.
Details the procedure for changing engine oil, filter, and cleaning screens.
Guides on how to add engine oil, including oil types and quantities.
Provides guidelines and warnings for cleaning the motorcycle safely.
Outlines checks and maintenance for preparing the motorcycle for winter storage.
Provides recommendations and steps for storing the motorcycle for extended periods.
Details the steps required to prepare the motorcycle after storage.
Provides detailed specifications for the engine, including bore, stroke, and valve clearance.
Lists critical tightening torques for engine components and the required threadlocker.
Details the capacities for engine oil, coolant, and fuel.
Provides specifications for the frame, fork, shock absorber, and brake system.
Lists specifications for the battery, key, and fuses.
Details front and rear tire specifications and manufacturer.
Provides the article number and model for the front fork.
Lists specifications for the shock absorber, including damping and preload.
Lists critical tightening torques for chassis components.
Lists FCC and IC IDs for various electronic components.
Provides specifications and recommended suppliers for brake fluid.
Details coolant specifications, including antifreeze protection and recommended suppliers.
Lists standard/classification and recommended suppliers for SAE 10W/50 engine oil.
Lists standard/classification and recommended suppliers for SAE 5W/40 engine oil.
Provides standard/classification and guideline for fork oil.
Provides standard/classification for shock absorber fluid.
Details fuel grade specifications, ethanol content, and warnings.
Lists recommended supplier and product for chain cleaning.
Lists recommended supplier and product for fuel stabilization.
Lists recommended supplier and product for lubrication.
Lists recommended supplier and product for cleaning the motorcycle.
Lists recommended supplier and product for paint care.
Lists recommended supplier and product for material protection.
Lists recommended supplier and product for surface cleaning.
Lists recommended supplier and product for chain lubrication.
Lists recommended supplier and product for general lubrication.
Explains the JASO T903 MA2 standard for motorcycle engine oils.
Explains the SAE viscosity classification system for oils.
Provides definitions for technical terms used in the manual.
Provides a list of common abbreviations used in the manual.
Explains the meaning of red symbols indicating immediate error conditions.
Explains yellow/orange symbols indicating prompt intervention for errors or driving aids.
Explains green/blue symbols that reflect information or status.
To Next Page