KTM 300 EXC - 15.9 Checking the Headlight Setting

15 ELECTRICAL SYSTEM
106
15.5 Removing the headlight mask with the headlight
E00355-10
– Detach the brake line and wiring harness from the headlight
mask.
–
Loosen rubber strap
1
. Slide the headlight mask up and
swing it forward.
E00356-10
–
Detach plug-in connectors
2
and take off the headlight mask
with the headlight.
15.6 Installing the headlight mask with the headlight
E00356-11
Main work
–
Join plug-in connectors
1
.
E00355-11
– Position the headlight mask and secure it with rubber
straps
2
.
The holding lugs engage in the fender.
– Position the brake line and wiring harness in the brake line
guide.
Finishing work
– Check the headlight setting. ( p. 108)