KTM 300 EXC - Removing the Seat; Mounting the Seat

12 SERVICE WORK ON THE CHASSIS
66
12.18 Removing the seat
S03480-10
–
Remove screw
1
on the left side.
H02218-10
– Raise the rear of the seat, pull the seat back, and lift it off.
12.19 Mounting the seat
H02218-11
– Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat forward.
– Make sure the seat is correctly latched in place.
S03480-10
–
Mount and tighten screw
1
on the left side.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)