KTM RC 200 User Manual

15 ELECTRICAL SYSTEM 132
L02157-11
–
Pull back the positive terminal cover

.
–
Disconnect positive cable

from the battery.
–
Detach rubber band

.
– Pull the battery up and out of the battery holder.
Info
Never operate the motorcycle with a discharged battery or without a battery. In
both cases, electrical components and safety devices can be damaged. The vehi-
cle is therefore no longer roadworthy.
15.2 Installing the battery
L02157-10
Main work
– Position the battery in the battery holder.
Guideline
The terminals of the battery must face upwards.
–
Attach rubber band

.
–
Position the positive cable

and mount and tighten the screw.
–
Position positive terminal cover

.

KTM RC 200 Specifications

General

Displacement	199.5 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP APEX Monoshock
Bore x Stroke	72 mm x 49 mm
Compression Ratio	11.5:1
Max Power	25 PS @ 10000 rpm
Max Torque	19.2 Nm @ 8000 rpm
Front Brake	300 mm disc
Rear Brake	230 mm disc
Fuel Tank Capacity	13.7 liters
Kerb Weight	160 kg
Front Suspension	WP APEX 43 mm Upside Down
ABS	Dual Channel
Tyre Front	110/70-17
Tyre Rear	150/60-R17
Ground Clearance	157 mm
Engine Type	Single Cylinder, Liquid Cooled