KTM RC 200 User Manual

7 COMBINATION INSTRUMENT 52
7.18 Distance menu 1 TRIP 1
401304-01
Condition
Alternative 1
• The ignition is on.
• The motorcycle is stationary.
Alternative 2
• The ignition is on.
• The motorcycle is moving.
– Press the MODE button briefly and repeatedly until TRIP 1 appears on the display.
TRIP 1shows the distance since the last reset, such as between two refueling stops. TRIP 1
is always running and counts up to 999.9.
Press the SET button
for 5 - 10 seconds.
Display of TRIP 1 is reset
Press the MODE but-
ton.
Next display mode on the display
7.19 Distance menu 2 TRIP 2
401305-01
Condition
Alternative 1
• The ignition is on.
• The motorcycle is stationary.
Alternative 2
• The ignition is on.
• The motorcycle is moving.
– Press the MODE button briefly and repeatedly until TRIP 2 appears on the display.
TRIP 2shows the distance since the last reset, such as between two refueling stops. TRIP 2
is always running and counts up to 999.9.

KTM RC 200 Specifications

General

Displacement	199.5 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP APEX Monoshock
Bore x Stroke	72 mm x 49 mm
Compression Ratio	11.5:1
Max Power	25 PS @ 10000 rpm
Max Torque	19.2 Nm @ 8000 rpm
Front Brake	300 mm disc
Rear Brake	230 mm disc
Fuel Tank Capacity	13.7 liters
Kerb Weight	160 kg
Front Suspension	WP APEX 43 mm Upside Down
ABS	Dual Channel
Tyre Front	110/70-17
Tyre Rear	150/60-R17
Ground Clearance	157 mm
Engine Type	Single Cylinder, Liquid Cooled