KTM RC 200 User Manual

7 COMBINATION INSTRUMENT 47
In this menu, the average speed and the average fuel consumption 1 are displayed in
L/100 km (or L/100 miles).
Info
The average fuel consumption 1 is displayed after several 100 meters of travel after
the ignition is switched on.
If the ignition was switched off for over 60 minutes, the display of the average
speed and average fuel consumption 1 is reset to 0.
Press the SET button
briefly.
Next display mode on the info display
7.13 Average fuel consumption 1/average fuel consumption 2 menu
401466-01
Condition
Alternative 1
• The ignition is on.
• The motorcycle is stationary.
Alternative 2
• The ignition is on.
• The motorcycle is moving.
– Press the SET button briefly and repeatedly until the desired info display appears.
In this menu, the average fuel consumption 1 in L/100 km (or L/100 miles) and the aver-
age fuel consumption 2 in km/L (or miles/L) are displayed.
Info
The average fuel consumptions 1 and 2 are displayed after several 100 meters of
travel after the ignition is switched on.
If the ignition was switched off for over 60 minutes, the display of the average fuel
consumption 1 and 2 is reset to 0.

KTM RC 200 Specifications

General

Displacement	199.5 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP APEX Monoshock
Bore x Stroke	72 mm x 49 mm
Compression Ratio	11.5:1
Max Power	25 PS @ 10000 rpm
Max Torque	19.2 Nm @ 8000 rpm
Front Brake	300 mm disc
Rear Brake	230 mm disc
Fuel Tank Capacity	13.7 liters
Kerb Weight	160 kg
Front Suspension	WP APEX 43 mm Upside Down
ABS	Dual Channel
Tyre Front	110/70-17
Tyre Rear	150/60-R17
Ground Clearance	157 mm
Engine Type	Single Cylinder, Liquid Cooled