KTM RC 200 User Manual

211 pages

To Next Page

To Previous Page

23 TECHNICAL DATA 182

Valve diameter, exhaust 24 mm (0.94 in)

Valve clearance, intake, cold 0.08… 0.12 mm (0.0031… 0.0047 in)

Valve clearance, exhaust, cold 0.13… 0.17 mm (0.0051… 0.0067 in)

Crankshaft bearing Two ball bearings

Conrod bearing Sleeve bearing

Pistons Cast light alloy

Piston rings 1 compression ring, 1 tapered compression piston ring, 1 oil

scraper ring

Engine lubrication Pressure circulation lubrication with one rotary pump

Primary transmission 22:72

Clutch Clutch in oil bath/mechanically activated

Transmission 6-gear, claw shifted

Transmission ratio

1st gear 12:34

2nd gear 15:31

3rd gear 18:28

4th gear 21:26

5th gear 22:23

6th gear 24:22

Mixture preparation Electronically controlled fuel injection

Ignition Contactless controlled fully electronic ignition with digital ignition

adjustment

Alternator 12 V, 296 W

Spark plug BOSCH VR 5 NE

Spark plug electrode gap 0.8 mm (0.031 in)

Questions and Answers:

Need help?

Do you have a question about the KTM RC 200 and is the answer not in the manual?

General

Displacement	199.5 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP APEX Monoshock
Bore x Stroke	72 mm x 49 mm
Compression Ratio	11.5:1
Max Power	25 PS @ 10000 rpm
Max Torque	19.2 Nm @ 8000 rpm
Front Brake	300 mm disc
Rear Brake	230 mm disc
Fuel Tank Capacity	13.7 liters
Kerb Weight	160 kg
Front Suspension	WP APEX 43 mm Upside Down
ABS	Dual Channel
Tyre Front	110/70-17
Tyre Rear	150/60-R17
Ground Clearance	157 mm
Engine Type	Single Cylinder, Liquid Cooled