EasyManua.ls Logo

KTM RC 200 - Tuning the Chassis; Adjusting Shock Absorber Spring Preload

KTM RC 200
211 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 SERVICE SCHEDULE 73
Every two years
Every year
Every 15,000 km (9,300 mi)
Every 7,500 km (4,650 mi)
After 1,000 km (620 mi)
Check the chain tension. ( p. 87)
Check the coolant level in the compensating tank. ( p. 148)
Check that the radiator fan is functioning properly.
Change the air filter, clean the air filter box.
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly.
Check the cables for damage and routing without sharp bends.
Check the valve clearance.
Check the valve clearance, change the spark plugs.
Change the front brake fluid.
Change the rear brake fluid.
Check the steering head bearing play.
Check the low beam headlight adjustment. ( p. 144)
Check the high beam headlight adjustment. ( p. 145)
Final check: Check the vehicle for roadworthiness and take a test ride.
Read out the fault memory using the KTM diagnostics tool after a test ride.
Reset the service interval display.
Make the service entry in the KTM Dealer.net and in the Service and Warranty Booklet.
One-time interval
Periodic interval

Table of Contents

Related product manuals