KTM RC 390 2018 - Checking the Low Beam Headlight Adjustment

16 ELECTRICAL SYSTEM
188
V00615-10
– Position the socket with the high beam bulb in the headlight
housing.
– Turn the socket clockwise.
– Check that the lighting is functioning properly.
Finishing work
– Check the high beam headlight adjustment. ( p. 190)
16.8 Checking the low beam headlight adjustment
0
0
AA
0
0
BB
400726-10
– Position the vehicle upright on a horizontal surface in front of
a light wall and make a marking at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle perpendicular to the wall at a distance
A
from the wall and switch on the low beam.