KTM RC 390 2018 - Chassis tightening torques

TECHNICAL DATA 23
245
23.9 Chassis tightening torques
Screw, chain guard EJOT PT
®
K60x30 4 Nm (3 lbf ft)
Remaining screws, chassis M4 4 Nm (3 lbf ft)
Screw, engine electronics control
unit
M4 3 Nm (2.2 lbf ft)
Nut, chain guard M5 7 Nm (5.2 lbf ft)
Nut, reflector on retaining plate M5 5 Nm (3.7 lbf ft)
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft)
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
Screw, anti-rotation lock, handle-
bar stub (All standard models)
M5 4 Nm (3 lbf ft)
Screw, battery compartment M5 4 Nm (3 lbf ft)
Screw, cover in front of battery
compartment
M5 4 Nm (3 lbf ft)
Screw, fuel tank cover M5 4 Nm (3 lbf ft)
Screw, retaining plate on license
plate holder
M5 4 Nm (3 lbf ft)
Screw, side stand switch M5 5 Nm (3.7 lbf ft)
Loctite
®
243™
Screw, tail end lower part M5 4 Nm (3 lbf ft)
ABS fitting M6 7 Nm (5.2 lbf ft)
Loctite
®
243™